Laboratory for Material Texture
Graduated student
| Name | Degree | Grad. Year | Status | Thesis Topic |
| 盧彥羽 | Master | 2006 | 光洋應材 | On anisotropy of indentation induced piling-up by using optical microstrain measurement
以光學量測微應變探討巨觀壓痕之異向性 |
| 薛志廷 | Master | 2006 | N/A | On the friction influenced zone of pure aluminum bicrystals using plane strain compression
摩擦力對純鋁雙晶受平面壓縮應變的影響區之探討 |
| 陳志慶 | Master | 2006 | 成大材料博士班 | On The Plastic Behavior of Nanocrystalline Aluminum
奈米鋁材料塑性行為之探討 |
| 廖佑諭 | Master | 2007 | TSMC | The Influence of Grain Boundary and Triple Junction on Plastic Deformation
探討晶界與三晶節點對塑性變形的影響 |
| 王翰弘 | Master | 2007 | 中研院助理 | Residual Strain Measurement by using Electron Diffraction and Its Application
以電子繞射量測殘留應變與其應用 |
| 林瑋玲 | Master | 2007 | N/A | Investigation on Strain Induced Grain Migration Using Modified Monte Carlo Method
以蒙地卡羅法探討應變誘發之晶粒遷移 |
| 顏士欽 | Master | 2008 | TSMC | On the Influences of Cold Rolling on the Preferred Orientation and the Magnetic Flux of Cobalt-based Alloy
探討冷軋加工對鈷基合金靶材的優先方位及磁通量之影響 |
| 劉光泰 | Master | 2008 | TSMC | On the Effect of Current Density and Frequency of Pulse Electrodepostion on the Nanocrystalline Twins of Pure Copper
探討脈衝電鍍法之電流密度及頻率對奈米銅雙晶之影響 |
| 黃怡華 | Master | 2008 | TSMC | Indentation-induced pop-in phenomena of single crystal aluminum:experiment and simulation approaches
探討以奈米探針壓印鋁單晶塑性變形之實驗及模擬 |
| 雲建順 | Master | 2009 | 長亨精密 | Theoretical modeling and experiments for phase transformation of low carbon steel during continuous cooling
低碳鋼在冷卻過程中相變態之理論模型與實驗 |
| 湯凱文 | Master | 2009 | Characterization of the Cross-section Microstructure of Pulse Electroplaing Cu
脈衝電鍍銅的橫截面微結構及其特性 |
|
| 羅力友 | Master | 2010 | 聯電 | EBSD Characterization of Dislocation Structure of Indentation Induced Aluminum Single Crystal
以EBSD做GND分佈模擬與殘留應變分佈模擬 |
| 蔡國順 | Master | 2010 | On Noise Statistics of Electron Backscattering Diffraction
背向式散射電子繞射儀之雜訊統計分析 |
|
| 闕壯羽 | Master | 2010 | 中鋼 | Prepatation of Fe-Pd Ferromagnetic Shape Memory Alloy and EBSD Analyzing
磁性形狀記憶合金之製備及EBSD分析 |
| 蘇保鳴 | Master | 2011 | N/A | Theoretical Modeling and Experiments for Phase Transformation of Low Carbon Steel During Continuous Cooling
低碳鋼在冷卻過程中相變態之理論模型與實驗 |
| 許經偉 | Master | 2011 | 聯電 | Analysis of Ti-Ni Alloy by EBSD
鈦鎳合金之EBSD分析 |
| 林雅雯 | Master | 2011 | 奇美材料 | Preparation of Copper Nanotwin and Analysis of EBSD,Mechanical Properties and Electric Properties
奈米銅雙晶之製備EBSD機械性質及電性之研討 |
| 郭騰憶 | Master | 2011 | N/A | Water Model Study of The Effect of Top-Blown Processing Parameters of Steel Ladle on Fluid Field
盛鋼桶頂吹製程參數對流場影響之水模研究 |
| 陳瑞杰 | Master | 2012 | System Development of Stress Image Microscopy (SIM)
應力電子顯微鏡系統之研發 |
|
| 羅新傑 | Master | 2012 | Study on Inclusions in Structure Steels
結構用鋼胚中介在物之研究 |
|
| 伍天山 | Master | 2012 | N/A | Effect of Cold Rolling on Texture and Microstructure in FePd alloys
冷軋鐵鈀合金之織構與微結構發展之研究 |
| 陳志慶 | Ph.D. | 2012 | 中山博士後研究 | On Spatial and Angular Resolutions in Electron Bckscattering Diffraction
背向散射電子繞射技術的空間及角度解析度之探討 |
| 黃俊銘 | Master | 2013 | Effect of Coating Thickness and Atomic Number on Backscattering Electron Signals in Metallic and Ceramic Substrates
探討鍍膜厚度及原子序與金屬及陶瓷基板對背向散射電子訊號的影響 |
|
| 林芳緯 | Master | 2013 | 矽品精密 | Effect of B and Nb Elements on Magnetic and Heating Properties of Fe-bases Bulk Metallic Glass
硼與鈮元素對鐵基金屬玻璃的磁與加熱性質之影響 |
| 傅丞逸 | Master | 2013 | 光洋應材 | EBSD Characterization of Intermetallic Layers in Cu/Al Joint under HTST ans HAST Reliabillity Tests
以EBSD分析HTST與HAST可靠度測試後銅-鋁接合處之介金屬層 |
| 林鴻濱 | Ph.D. | 2014 | Prepatation of Fe-Pd Ferromagnetic Shape Memory Alloy and EBSD Analyzing
磁性形狀記憶合金之製備及EBSD分析 |
|
| 許逸君 | Master | 2014 | TSMC | Effect of Preferred Orientation on Magnetic Property in Nd-Fe-B Alloy after Hot Deformation
熱壓銣鐵硼合金之優選方位對磁性質的影響 |
| 徐儀珊 | Master | 2014 | N/A | Effect of Austenite Grain Size and Cooling Rate on the Formation of Acicular Ferrite in SM750 Steel
探討沃斯田鐵晶粒尺寸及冷卻速率對SM750鋼的針狀肥粒鐵形成之影響 |
| 謝秉穎 | Master | 2015 | TSMC | Texture Simulation of Shear Bands in F.C.C. Metals Using Taylor-Based Models
泰勒模型模擬F.C.C.金屬中剪切帶之織構研究 |
| 陳皇均 | Master | 2015 | Effect of Stacking Fault Energy on Cold-Rolling Texture and Microstructure of Brass, Nickel and Copper
探討疊差能對冷軋黃銅、鎳及銅織構與微結構之影響 |
|
| 林柏勳 | Master | 2015 | 自由業 (編曲配樂) |
EBSD Characterization of Intermetallic Layers in Ag-Pd/Al and Ag-Au-Pd/Al Joints under HTST and HAST Reliability Tests
以EBSD分析HTST與HAST可靠度測試後銀-鈀/鋁及銀-金-鈀/鋁接合處之介金屬層 |
| 陳美璇 | Master | 2015 | 台灣應材 | Effect of Magnesium Addition on Grain Coarsening in Low Carbon Steels during Austenitizing Process
鎂含量對於低碳鋼於高溫沃斯田鐵化過程中晶粒粗化之影響 |
| 李彥慧 | Master | 2015 | TSMC | On the Spatial Resolution of Standard - and Transmission –EBSD Using Monte Carlo Simulation
探討蒙地卡羅法模擬背向式與穿透式背向散射電子繞射顯微鏡的空間解析度 |
| 彭琮洋 | Master | 2016 | TSMC | Texture Simulation of Shear Bands in B.C.C. Metals Using Taylor-Based Models
泰勒模型模擬B.C.C.金屬中剪切帶之織構研究 |
| 黃琲雅 | Master | 2015 | 成大材料博士班 | Investigation of Characterization and Deformation Behavior of MnS in 1215MS Steel during Thermo-mechanical Process
探討熱機過程中硫化錳的形貌分析與變形行為 |
| 林志韋 | Master | 2016 | 聯華電子 | Dry-Reagent Strip Biosensor for Single Nucleotide Polymorphism in tmigd1 Gene
tmigd1基因單核苷酸多型性之乾式生物檢測試紙系統 |
| 施智文 | Master | 2016 | Effect of Accelerating Voltage and Specimen Thickness on Physical Spatial Resolution of Transmission Electron Backscatter Diffraction in Copper
探討加速電壓和試片厚度對穿透式背向散射電子繞射技術之空間解析度的影響 |
|
| 郭珈瑋 | Master | 2017 | Effect of Atomic Number Z on Spatial Resolution of Transmission Electron Backscatter Diffraction
探討原子序對穿透式背向散射電子繞射技術之空間解析度的影響 |
|
| 吳庭宜 | Master | 2017 | Dislocation Structure Analysis of Deformed and Annealed Crofer 22 H Stainless Steel using ECCI Technique
以ECCI技術分析變形與退火過程中Crofer 22 H 不鏽鋼中差排組織之演化 |
|
| 王柏盛 | Master | 2017 | Optimization of Dry-Reagent Strip Biosensor and Reproducibility for Single Nucleotide Polymorphism in tmigd1 Gene
tmigd1基因單核甘酸多型性乾式檢測之試紙參數的最佳化與基因再現性測試 |
|
| 賴致廷 | Master | 2017 | Effect of Mg Addition on the Grain Growth Behavior of Austenite in SS400
鎂添加對SS400低碳鋼於高溫下沃斯田鐵晶粒成長之影響 |
|
| 蕭証文 | Ph.D. | 2017 | Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel
高鉻肥粒鐵系不鏽鋼於熱機過程中顯微組織的演變及Laves Phase的析出之研究 |
|
| 賴暄澔 | Master | 2018 | TSMC | In-situ Study of Inclusions Behavior in SS400 with Magnesium Addition at High Temperature
含鎂添加之SS400低碳鋼中介在物之高溫臨場研究 |
陳彥廷 | Master | 2018 | Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel
高鉻肥粒鐵系不鏽鋼於熱機過程中顯微組織的演變及Laves Phase的析出之研究 |
蕭世杰 | Master | 2018 | 成大材料博士班 | Understanding the Difference in Preferred Orientation Intensity of Cold-Rolled Copper between Taylor Model Simulation and Experiment
探討泰勒模型模擬和實驗間冷軋純銅優選方位強度差異之研究 |
吳宏一 | Master | 2018 | Microstructure Development and Precipitation Behavior of Laves Phase during Thermomechanical Process in High Chromium Ferritic Stainless Steel
高鉻肥粒鐵系不鏽鋼於熱機過程中顯微組織的演變及Laves Phase的析出之研究 |
孫仲紹 | Master | 2019 | TSMC | Simulation of Flow Curve and Rolling Texture of Polycrystalline Copper Using Crystal Plasticity Finite Element Method(CP-FEM)
以晶體塑性有限元素法模擬多晶銅軋延之塑流曲線及織構 |
林昕瑩 | Master | 2019 | TSMC | Influence of Twin-Matrix Lamellae on Rolling Texture Simulation in Low Stacking Fault Energy F.C.C. Metals Using Taylor-Based Models
以泰勒模型模擬雙晶-基材薄層對低疊差能F.C.C.金屬軋延織構之影響 |
邱泰育 | Master | 2019 | Effect of Laser Power on Mechanical Properties and Microstructure of 316L Stainless Steel Deposited by Direct Energy Deposition(DED)
探討直接能量沉積之雷射瓦數對316L不鏽鋼中機械性質與微結構的影響 |
蔡宗憲 | Master | 2019 | Effect of Manganese Content and cooling rate on Transverse Crack in Low Carbon Steel
錳含量與冷卻速率對低碳鋼中橫向裂紋之影響 |
黃鵬威 | Master | 2020 | TSMC | Investigation of Microstructure and Mechanical Properties of Extruded AA6061 Rod and Plate
探討AA6061擠至棒材及板材之顯微結構及機械性質 |
湖琇涵 | Master | 2020 | TSMC | Effect of Bismuth Addition on Microstructure and Mechanical Properties of SAC Solder Ball
鉍添加對焊錫球的顯微組織與機械性質的影響 |
劉晏文 | Master | 2020 | TSMC | On Stress-Strain Method of Polycrystalline Copper from Spherical Indentation Using Finite Element Method
以有限元素法探討多晶銅球形壓痕應力-應變方法 |
潘怡蓁 | Master | 2020 | TSMC | Novel Background Subtraction Technique of Kikuchi Pattern and Image Quality Indexing Methods
先進菊池圖背景扣除技術與影像品質評估方法 |
李佳優 | Master | 2021 | TSMC | Earing prediction of as-annealed AA5151 aluminum alloy from texture
探討退火AA5151鋁片之集合組織預測凸耳行為之研究 |
歐柔均 | Master | 2021 | TSMC | Effect of Annealing Process on Cu-to-Cu Bonding in Cu/SiO2 Hybrid Bonding
退火製程對Cu/SiO2混合接合製程中銅對銅接合之影響 |
蘇雍智 | Master | 2021 | TSMC | Investigation of Surface Contamination and Low S/N ratio on EBSD resolution determination of Silver at Low Accelerating Voltage
以銀材料探討表面積碳與低訊噪比對低加速電壓EBSD的解析度之影響 |
王俊凱 | Master | 2021 | 群聯電子 | Effect of cathodic protection on hydrogen induced damage of S355 low carbon steel and its weld
陰極保護對S355低碳鋼及其焊件氫損傷之影響研究 |
| 黃琲雅 | Ph D. | 2021 | TSMC | Investigation of Stacking-Fault Energy on Indentation Deformation Behavior in Single Crystals of Ni and Ag
探討疊差能對單晶鎳及銀的壓痕變形行為之影響 |
| 陳瑞騰 | Master | 2022 | TSMC | Investigation of Structure and Crystallinity of Poly-3-hexylthiophene (P3HT) Thin Film Using XRD and EBSD
以XRD與EBSD探討聚3-己基噻吩(P3HT)薄膜之結構與結晶性 |
| 施博文 | Master | 2022 | Texture Simulation of Hot-Rolled AA1100 Aluminum Alloy Using Taylor Model
以泰勒模型模擬AA1100熱軋鋁合金之集合組織 |
|
| 林盈棟 | Master | 2022 | 國軍online | Effects of Manganese and Carbon on Formation of Proeutectoid Ferrite in Low Carbon Steels
探討錳及碳對低碳鋼中初析肥粒鐵形成之影響 |
| 蔡依芸 | Ph D. | 2022 | TSMC | Investigation of Phase Transformation in 3Y-TZP Ceramics Induced by Air-abrasion and Hydrothermal Process using EBSD Technique
利用背向散射電子繞射技術探討氣動噴砂及水熱處理對釔添加氧化鋯陶瓷誘發之相變化行為 |
